Philips Lumea SC1994 Manual page 16

16
English
9 Check your skin. The highest setting that...
- still felt comfortable and
- did not show a skin reaction (e.g. redness, irritation, rash)
... is the setting to start the treatment with.
C Treatment
IMPORTANT: First finish section A (Remove hair & clean your skin) and B
(Test skin 24 hrs before treatment).
1 Connect the power adapter to the device and plug into a power outlet.
2 Press the on/off button
to turn on the device.
3 Choose the setting you selected after the skin test (section B, step 9).
4 Press the device firmly onto your skin and hold it in place. The 'READY to
flash' light should light up white.