Installing Ip42 Roof-Mounted Cooling Units; Fig. 40. Lifting An Ip42 Cooling Unit; Table 5 Installation Material Per Ip42 Unit - ABB ACS5000 User Manual

5.10.2. Installing IP42 roof-mounted cooling units

CAUTION
Heavy object! An IP42 cooling unit weighs 40 kg.
40 kg
→ Only use the rotating eyebolts (ABB ID: 3BHE015753P0008) that were delivered with
the loose part of the drive
→ Use appropriate slings and shackles with the eyebolts
→ Before you begin, read Section 4.5.3, "Lifting with rotating eyebolts", page 61

TABLE 5 Installation material per IP42 unit

Item
Self-tapping Torx screws
Washers with sealing
Cable binders
Referring to Fig. 40:
1. Install rotating eyebolts (1) in the top corners of the IP42 cooling unit.
CAUTION! For a single lifting operation, tighten the eyebolts (1) firmly with the star key (2).
DO NOT leave the star key in the bolt head. The eyebolt must be able to rotate 360° freely.
For a permanent installation, tighten the eyebolts to the nominal torque that is specified in
Section 4.5.1, "Lifting attachment types", page 59.
1 1
4 ×
2 2
360°
3BHE015753P0008

Fig. 40. Lifting an IP42 cooling unit

2. Attach the appropriate slings and shackles to the rotating eyebolts.
3. Orient the rotating eyebolts in the direction of force.
CAUTION! Rotation during transportation must be avoided.
PRODUCT
ACS5000W gen. 2
Quantity Details
18 M6 × 16
18 6.8 × 1 (4.8 × 2.8)
1
DOCUMENT KIND
User manual
1
3
DOCUMENT ID.
3BHS799208 E01
MECHANICAL INSTALLATION
ID number
HAQN401050P0259
3BHB034338R0001
1
1
REV. LANG. PAGE
J en 74/186