Care And Maintenance; Change Of Ownership - identités 812010 Instruction Manual

USE
(1) Lift up the lever and turn the seat to face the user, then lock the seat into position by lowering the lever and keep swiveling
the seat until it locks in position.
(2) Transfer carefully the user into seat; beware of wet and slippery surfaces.
(3) Unlock the seat by lifting the lever.
(4) Lift the user's legs over the edge of the bath one at a time or both together while the bath seat is swiveled slowly.
(5) When users are into bath position lock the seat and ensure that it is locked into position and no longer rotates freely.
(6) To exit the bath, unlock the seat (by lifting the lever) and turn the seat slowly, while lifting the user's legs over the edge of the
bath one at a time or both together.
(7) Lock the bath seat when the user faces the open side of the bath. The user can now stand up carefully and slowly.
Using the armrests, press on the button and lift backwards the armrests.
Rental: this chair can be rented under the condition that it was correctly cleaned.
This user's manual belongs to that product and must be delivered to each new user.

CARE AND MAINTENANCE

Failure to care for and monitor your product may result in the risk of serious injury.
•
Wipe the product dry after each use.
•
Periodically clean the bath seat with a damp cloth and a mild detergent or disinfectant. For example, a mild chloride-
based disinfectant can be used.
•
The bath seat can also be cleaned in an aqueous system up to 80ºC.
•
Check that the bath seat swivels easily, smoothly and locks into place. If the locking mechanism does not seem positive
or if there is excessive movement in the unit, remove it from service and contact your dealer.
•
Check the bather for cracks and damage, particularly to the seat and plastic tube.
•
Do not use in environments above 60ºC (e.g. saunas).
•
In case of malfunction, do not repair the product yourself. Consult an authorised dealer.
•
Checklist :
To keep the product in good condition, check before each use, and check regularly as follows:
Check the article
Check the operation of the spring loaded knob to allow 90° rotation of
the product
Check the condition and the fixation of the armrests
Check the function of the anti-slip screws
Check that the brackets are fully attached to the edges of the bathtub

CHANGE OF OWNERSHIP

The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions. When transferring
the product, remember to hand over all the necessary technical documents to the new user. Beforehand, the product must be
inspected by an authorised specialist.
RECYCLIN
G
When the product has become unusable and you have to throw it away: please contact your specialist dealer. If you wish to
carry out recycling for yourself, ask your local waste management company for disposal guidelines.
Version Mai 2023
Anytime Weekly
X
X
X
X
9