Performance Data Sheet - GE Profile PGD Series Owner's Manual & Installation Instructions

Performance Data Sheet

Model: GE Appliances XWFE
performance data sheet and at iapmort.org.
Substance Tested for Reduction
Chlorine Taste and Odor
Chloramine Taste and Odor
Particulate, Class I
Cysts
Lead
Mercury
Asbestos
Toxaphene
VOC (Chloroform surrogate chemical)
Alachlor
Carbofuran
carbon tetrachloride
chloropicrin
1,2-dichloroethane
1,1-dichloroethylene
cis-1,2-dichloroethylene
trans-1,2-dichloroethylene
1,2-dichloropropane
cis-1,3-dichloropropylene
dinoseb
Endrin
bromochloroacetonitrile
dibromoacetonitrile
dichloroacetonitrile
trichloroacetonitrile
1,1-dichloro-2-propanone
1,1,1-trichloro-2-propanone
heptachlor (H-34, Heptox)
heptachlor epoxide
hexachlorobutadiene
hexachlorocyclopentadiene
Lindane
methoxychlor
pentachlorophenol
Styrene
1,1,2,2-tetrachloroethane
Tetrachloroethylene
Toluene
2,4,5-TP (silvex)
tribromoacetic acid
1,1,1-trichloroethane
1,1,2-trichloroethane
trichloroethylene
bromoform
bromodichloromethane
chlorodibromomethane
xylenes
Meprobamate
Atenolol
Metolachlor
Trimethoprim
Linuron
TCEP
TCPP
Phenytoin
Ibuprofen
Naproxen
Estrone
Bisphenol A
Nonyl phenol
48
Influent challenge Maximum permissible
concentration product water
(mg/L) concentration (mg/L)
2.0 mg/L +/- 10% N/A
3.0 mg/L +/- 10% 0.5
At least 10,000/mL N/A
50,000/L N/A
0.15 0.01
0.006 0.002
107 to 108 fibers/ L N/A
0.015 +/- 10% 0.003
0.300 0.015
0.050 0.001
0.100 0.003
0.081 0.001
0.190 0.001
0.078 0.0018
0.077 0.001
0.015 0.0002
0.110 0.0017
0.052 0.00002
0.08 0.001
0.040 0.001
0.088 0.0048
0.083 0.001
0.170 0.0005
0.086 0.001
0.080 0.001
0.079 0.001
0.170 0.0002
0.053 0.00059
0.088 0.001
0.044 0.00002
0.022 0.0005
0.024 0.0006
0.0096 0.0002
0.015 0.0003
0.0072 0.0001
0.0082 0.0003
0.025 0.00001
0.0107 0.0002
0.044 0.001
0.060 0.000002
0.055 0.00001
0.050 0.0001
0.096 0.001
0.120 0.004
0.150 0.0005
0.081 0.001
0.081 0.001
0.078 0.001
0.270 0.0016
0.042 0.001
0.160 0.0005
0.084 0.0046
0.150 0.0005
0.180 0.0010
0.300 0.015
0.300 0.015
0.300 0.015
0.070 0.001
400 +/- 20% 60
200 +/- 20% 30
1400 +/- 20% 200
1400 +/- 20% 200
1400 +/- 20% 200
140 +/- 20% 20
140 +/- 20% 20
5000 +/- 20% 700
5000 +/- 20% 700
200 +/- 20% 30
400 +/- 20% 60
140 +/- 20% 20
140 +/- 20% 20
2000 +/- 20% 300
1400 +/- 20% 200
Avg %
Application Guidelines/Water Supply Parameters
Reduction
96.9
Water Supply
96.9
Water Pressure
91.4
Water Temperature
>99.99
Capacity
98.85
96.3
It is essential that the manufacturer's recommended installation,
>99
maintenance and filter replacement requirements be carried out for the
86.95
product to perform as advertised. See Installation Manual for Warranty
99.7
information.
> 98
NOTE: While the testing was performed under standard
> 97
> 99
laboratory conditions, actual performance may vary.
> 99
98
of replacement elements please visit our website at
> 99
gewaterfilters.com.
99
98
> 99
WARNING
> 99
> 98
• Do not use with water that is microbiologically unsafe
95
or of unknown quality without adequate disinfection
> 99
before and after the system. Systems certified for cyst
> 99
reduction may be used on disinfected water that may contain
> 99
filterable cysts.
> 99
> 99
99
NOTICE
99
To reduce the risk of water leakage or flooding, and to
> 99
ensure optimal filter performance:
> 99
• Read and follow use instructions before installation and
98
use of this system.
98
98
• Installation and use MUST comply with all state and local
98
plumbing codes.
99
• Do not install if water pressure exceeds 120 psi (827
96
kPa). If your water pressure exceeds 80 psi (552 kPa), you
>99
must install a pressure-limiting valve. Contact a plumbing
98
professional if you are uncertain how to check your water
> 98
> 99 pressure.
> 99
• Do not install where water hammer conditions may occur.
> 99
If water hammer conditions exist you must install a water
> 99
hammer arrester. Contact a plumbing professional if you are
> 97
uncertain how to check for this condition.
> 99
• Do not install on hot water supply lines. The maximum
> 99
> 99
> 99
(38º C).
99
• Protect filter from freezing.
> 98
> 99
• Change the disposable filter cartridge every six months or
95
sooner if you observe a noticeable reduction in water flow
> 99
rate.
> 99
95
95
recommended intervals may lead to reduced filter
95
performance and cracks in the filter housing, causing water
>99
leakage or flooding.
95.5
95.9
53, 401, and P473 for the reduction of the substances listed
98.6
below. The concentration of the indicated substances in
98.6
98.7 water entering the system was reduced to a concentration
96.1
less than or equal to the permissible limit for water leaving
96.6
98.1
98.1
96
95.9
96.5
97.1
99.1
97.3
0.5 gpm (1.89 lpm)
Potable Water
25-120 psi (172-827 kPa)
170 gallons (643.5 liters)
To reduce the risk associated with
ingestion of contaminants:
XWFE System is certified by IAPMO R&T
against NSF/ANSI Standards 42, 53,
401, and P473 for the reduction of claims
specified on the performance data sheet and
at iapmort.org.
49-1000713 Rev. 1