GE Profile PGD Series Owner's Manual & Installation Instructions page 30

Installation Instructions
INSTALLING THE REFRIGERATOR (Cont.)
REMOVE LOWER LEFT-HAND
10
DOOR (on some models)
WARNING
instructions, leaving off parts, or overtightening
screws, can lead to the door falling off and result in
injury and property damage.
1. Securely tape the door shut with masking tape or
have a second person support the door.
Phillips head screwdriver.
3. Remove the tape keeping the door as straight as
possible, then lift up to remove.
CAUTION
Lifting Hazard.
A single person lift could cause injury. Gain
assistance when handling, moving, or lifting
refrigerator doors.
30
REMOVE LOWER RIGHT-HAND
11
DOOR (on some models)
1. Open lower right-hand door 90°.
2. Remove lower hinge cover by removing Phillips
head screw and unsnapping cover from hinge.
4. Securely tape the door shut with masking tape or
have a second person support the door.
Phillips head screwdriver.
6. Remove the tape keeping the door as straight as
possible, then lift up to remove.
CAUTION
Lifting Hazard
Freezer door is heavy Use both hands to secure
the door before lifting.
1. Pull the lower basket slide mechanism to full
extension with both hands.
notches on the slide mechanisms. NOTE: Place
one side in first, then align the other side.
3. Replace the attachment screws and torque the
screws to 65 in-lb (7.34 N-m).
To reassemble doors, reverse removal steps. Be
careful wires pass through bottom hight-hand
hinge.
49-1000713 Rev. 1