GE Profile PGD Series Owner's Manual & Installation Instructions page 5

Hide thumbs Also See for Profile PGD Series:

Table of Contents

Available languages

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

PROPER DISPOSAL OF YOUR OLD REFRIGERATOR

WARNING

SUFFOCATION AND ENTRAPMENT HAZARD

IMPORTANT: Child entrapment and suffocation

are not problems of the past. Junked or abandoned

refrigerators are still dangerous even if they will sit

refrigerator, please follow the instructions below to help

prevent accidents.

REFRIGERANT AND FOAM DISPOSAL:

and insulation material used requires special disposal procedures. Contact your local authorities for the

environmentally safe disposal or recyling of your refrigerator.

READ AND SAVE THESE INSTRUCTIONS

49-1000713 Rev. 1

Before You Throw Away Your Old Appliance

Leave the shelves in place so that children may not

easily climb inside.

Table of Contents

Show Quick Links

Hide quick links:

Chapters

Table of Contents

Need help?

Do you have a question about the Profile PGD Series and is the answer not in the manual?

Questions and answers

Marcia Lynne Hale

January 31, 2025

Brand new refrigerator. Auto water pitcher not filling.

1 comments:

Mr. Anderson

February 10, 2025

The auto water pitcher in the GE Profile PGD Series refrigerator may not be filling due to the following reasons:

1. Door Not Fully Closed – The pitcher fills automatically about 5 seconds after the door is closed. Ensure the door is completely shut.
2. Pitcher Not Properly Positioned – The pitcher must be fully dropped into the tray for it to fill.
3. Lid Not Secured Correctly – If the lid is not properly placed, it may interfere with the filling process.
4. Water Supply Issue – Make sure the refrigerator is connected to a working water supply.
5. Pitcher Feature Turned Off – Check if the autofill function is enabled.

If the issue persists, verify these steps and check the user manual for troubleshooting.

This answer is automatically generated