Planar EP6514K User Manual page 52

Advanced Setup Menu
Power Saving Config
DP Ver.
EDID Setup
Touch Control
Factory Reset
46
Options: Wake on VGA, Wake on All, Always On
Default: Wake on VGA
Note: For Wake on VGA and Wake on All, the display will enter power saving mode if no
signal is received for 5 minutes.
Select DisplayPort version of the DisplayPort inputs
Options: 1.1, 1.2
Default: 1.2
Note: DisplayPort 1.2 is the more modern standard and supports 3840x2160 @ 60 Hz
resolution. However, sometimes DisplayPort 1.1 is needed for compatibility with older
graphics cards.
Select EDID (Extended Display Identification Data) of the HDMI and DisplayPort inputs
Options: 4K2K, 1080p
Default: 4K2K
Note: Use the 1080p setting for the broadest support of lower resolution sources. Use the
4K2K setting to support high resolution sources such as 3840x2160.
Select whether the touchscreen controls the internal OPS PC, or controls an external PC
via the Touch USB connector
Options: Auto, OPS, External
Default: Auto
Restore all settings to their default
Options: No, Yes
Default: No
EP-Series Ultra HD LCD Displays User Guide