Beko SLDF 30524SS Owner's Manual page 48

INSTALLATION
ANTI-TIP STABILITY DEVICE
INSTALLATION INSTRUCTIONS
(2)
Warning: Verify the anti-tip device has
!
been properly installed and engaged.
• Ensure the anti-tip device is re-engaged
when the range is moved.
• Do not operate the range without the
anti-tip device in place and engaged.
• Failure to do so can result in death or
serious burns to children or adults.
Warning: Read carefully and follow the
!
instructions below.
16
Bracket Installation Option 2
1. Adjust your oven feets according to
your counter.
2. Measure the dimension 'A' in Figure 3 .
3. Mount the bracket to the wall as
mentioned in Figure 1.(Try to center
bracket while mounting.)Distance (B)
from the bottom of the bracket to the
floor should be equal to the formula in
Figure1 (Formula is B=A-2,3'').
4. Position the appliance on its place after
completing the installation.
5. Check the bracket hooked up to
appliance properly as shown as Figure2.