Maintenance - Husqvarna Z560X Operator's Manual

Introduction
WARNING:
maintenance work you must read and
understand the safety chapter.
Maintenance schedule
* = The instructions are not given in this operator's
manual.

Maintenance

Lubricate all grease nipples. Re-
Grease nipple on page 25 .
fer to
Do a check of the parking brake.
To examine and adjust
Refer to
the parking brake on page 18 .
Do a check of the safety system.
Safety devices on the
Refer to
product on page 8 .
Make sure that there are no fuel
or oil leaks from the product.
Make sure that there are no dam-
ages on the product.
Make sure that there are no loose
parts.
Do a check for damages on the
cutting deck.
Do a check of the tire pressure.
Tire pressure on page
Refer to
20 .
Start the engine and blades and
listen for unusual sounds.
Clean the inner surface of the
To clean
cutting deck. Refer to
the product on page 18 .
Clean around the engine.
Clean around the belts and the
belt pulleys.
Do a check of the battery connec-
tons.
Do a check of the muffler and the
spark arrestor screen.
16
Maintenance
Before you do any
Daily maintenance
Before After
use use
X
*
*
*
*
X
*
X
*
*
X = The instructions are given in this operator's manual.
O = Refer to the engine manual for instructions.
Maintenance schedule for the operator
Maintenance interval in hours
25 50 100 250
O
X
X
*
*
*
*
Each
season
300 400 500
2173 - 002 - 22.08.2023
*
*