Husqvarna Z560X Operator's Manual page 27

Hide thumbs Also See for Z560X:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Problem
The engine apparently has no
power.
There is vibration in the product.
The engine becomes too hot.
The battery does not charge.
The product moves slowly, with
irregular speed or not at all.
The drive of the blades do not
engage.
The transaxle leaks oil.
2173 - 002 - 22.08.2023
Cause
The air filter is clogged.
The spark plug is damaged.
There is air in the hydraulic system.
The blades are loose. Refer to
One or more of the blades are not balanced. Refer to
The engine is loose.
The air filter or the cooling fins are clogged.
There is overload in the engine.
The airflow around the engine is not sufficient.
The engine speed regulator is damaged.
The oil level is too low.
There is dirt in the fuel line.
The spark plug is damaged.
The connection at the cable connectors on the battery terminals is bad. Refer to
To clean the battery on page 18 .
The charging lead is disconnected.
The charging system does not operate correctly.
The parking brake is engaged.
The hydraulic release lever is engaged.
The drive belt on the transmission is loose or damaged.
There is air in the hydraulic system.
The drive belt on the mower deck is loose.
The electromagnetic coupling contact is loose.
A fuse is blown. Refer to
The seals, housing or gaskets are damaged.
There is air in the hydraulic system.
To examine the blades on page 22 .
Fuses on page 5 .
Throttle control on page 4 .
27

Advertisement

Table of Contents
loading

Table of Contents