Stove Phase General Layout - Ravelli Easy 12 C Use And Maintenance Manual

EN
Rev.0 23/03/2023
Pag.38

Stove phase general layout

Phase
FINAL CLEANING
IGNITION
WAITING FLAME
FLAME LIGHT
WORK
FIRE POT CLEANING
MODULATION
ECO STOP
T ON / T OFF
WAITING START
WAITING RESTART
HOT SMOKES
OFF
ANOMALY (general)
Use and maintenance manual Easy 12 C
Description
The stove is switching off, the cooling phase is not yet completed
The ignition phase has started,the pellets are loaded into firebox
The pellet is lighted by the hot air passing through the ignition candle
The flame is visible in the fire pot
The stove completed switch ON phase; you can change power
The stove is performing the cleaning
The room temperature set has been reached
Comfort Clima activated, temperature set has been reached; the stove is off.
The room sensor is off or an external thermostat has been connected and the room set
is set to EXT
The stove is cooling DOWN: when stove is cooled down can start automatically
The stove is in the cooling DOWN: when stove is cooled down can restart automatical-
ly.
The maximum fume temperature threshold has been reached. To facilitate cooling, the
stove brings the capacity to a minimum with ventilation at max power level
The stove is off
The stove has detected an anomaly; refer to the troubleshooting chapter.