Table of Contents
Advertisement
Main parts
Position
Element
A
Control Panel
B
Pellet cover
C
Grid for air passage
D
Combustion chamber
E
Combustion chamber door
F
Fire pot
G
Ashes drawer
Description of operation
Ravelli Easy 12 C pellet stoves are appliances for domestic heating powered by wood pellets with automatic loading. They are
suitable for use as a secondary heating system or as a support for the main heating system.
The heat generated by pellet combustion is diffused into the installation room by ventilation, as well as by radiation.
The stove is controlled by an electronic control unit that manages the start-up, operation and shutdown phases and also includes
many other functions for control, programming and safety.
The user can choose the operating power from 5 levels, or set the temperature to be maintained in the rooms. In this case the sto-
ve will manage the power to ensure maximum comfort. Among the functions of the electronic control unit there is also that of being
able to program the stove's start-up and shutdown by setting the weekly chronothermostat.
All this can be done from the comfort of the sofa using the hand-held remote control.
⚠
Recharge the fuel
⚠
Use only wood pellets, the characteristics shown in this manual.
During pellet loading prevent the pellet bag from coming into contact with hot surfaces.
��
It is not recommended to empty the pellet bag directly into the hopper to avoid depositing wood sawdust on the bottom of
the hopper.
To load the pellets inside the hopper, proceed as described below:
Step
Action
1
Open the pellet hopper cover
2
Pour the pellets into the hopper
3
Close the pellet hopper cover
Use and maintenance manual Easy 12 C
EN
Rev.0 23/03/2023
Pag.17
Advertisement
Table of Contents
