Table of Contents
Advertisement
2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
NOTICE
L
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1:
Assembly of the Mainframe, the Bases and Foams
1.
Attach the main frame (1) to the horseshoe base (2) with two bolts (17), two square neck bolts
(14), six washers (21) and four lock nuts (23).
2.
Attach the main frame (1) to the front base (3) with two square neck bolts (14), two washers (21)
and two lock nuts (23).
3.
Insert the foam tube (6) into the main frame (1).
4.
Attach the foams (10) on the foam tube (6) with one foam plug (12) on each side.
13
Advertisement
Table of Contents
