Orion OLMU-K4953 User Manual page 9

Attention for Installing
※
Warning
for peeling off side tape caution.
• Guide
Please, Peel off side tape slowly
•
• Avoid giving a shock or damage at LCD
corner or other parts during setting
Multi-Vision.
• Keep all LCDs balanced in vertical or horizontal
force after setting Multi-Vision. Avoid LCD is set
up tilted so it can give a damage to down LCD.
• Avoid that LCD is twisted.
• Avoid that LCD outside is shocked or
damaged by sharp thing.
- 12 -
• The load applied to all sets must be supported by the wall mount on which each set is
mounted through a VESA mount(600 x 400, TBD).
• The load must be supported only through a wall mount with a set through the VESA
wall mount. (Each set must be completely fixed to a wall or wall mount.)
※ Detailed installation instructions are described in our Main Frame User Manual.
■ How to Adjust the MLCD gap with the Adjuster.
Fixed
- 13 -