Basic Control - Orion OLMU-K4953 User Manual

6.5. Explanation of the command transmission method.
■ Normal Transmission Method.
•
You select MLCD sets in "Screen Configuration Window" clicking the left button of
the mouse. Maybe you want to select more than one MLCD set, drag the mouse.
Then you can transmit the Protocol command respectively to selected MLCD Sets.
■ Broadcast Transmission Method.
•
When broadcast checkbox is checked, entire command transmission method is
broadcast. You can transmit the Protocol command simultaneously to all connected
MLCD sets.
※All Protocol commands are affected by the command transmission method.

6.6. Basic Control

• To control basic operation in Main Screen.
• Please wait for at least 10 seconds before executing "Power On" command
after the first AC power connection. If not, it may cause abnormal behavior.
Caution
• Please disconnect AC power and reconnect in case of abnormal behavior.
- 54 -
•
POWER : " POWER ON/OFF " button is to control power of selected MLCD Sets.
•
MULTISCALE : " Full Screen On " button is to make multiscaling screen. " Full Screen Off "
button is to make individual screen.
•
Drag the panel -> Click the "Full Screen On" button
< Full Screen Off >
- 55 -
< Full Screen On >