6. Save the IP address by clicking "SET TCP/IP" after type-in.
7. Click "GET TCP/IP" and check whether the IP address is correct.
- 50 -
6.3.3.2. In case of connection to user's computer
■ Check the network informations
1. Execute the OSW.
2. After Serial Connection, Turn on the MLCD.
3. Click left top of the mouse on the MLCD that you want to control on the screen configuration
window.(This MLCD should be connected to LAN cable)
4. Click → OTHER → LAN
5. Click the "LAN ON" and click "GET TCP/IP" to read the initial network
configuration of the MLCD.
- 51 -