Beko SLGR 30524SS Owner's Manual page 28

CARE AND MAINTENANCE
REPLACING THE OVEN LAMP
Warning: Hot surfaces cause burns!
!
Before replacing the oven lamp, make
sure that the product is disconnected
from mains and cooled down in order
to avoid the risk of an electrical shock.
Caution: The oven lamp is a special
!
electric light bulb that can resist up
to 300°C (573 °F). See Technical
specifications. for details. Oven lamps
can be obtained from Authorised
Service Agents or technician with
license.
Caution: Position of lamp might vary
!
from the figure.
• The oven lights can be illuminated with
lamp button. The lights are switched
on when the door is opened or when
the oven is in a cooking cycle. The oven
lights are not illuminated during self
clean. Each light assembly consist of a
removable lens, a light bulb as well as a
light socket housing that is fixed in place.
Light bulb replacement is considered to
be a routine maintenance item.
Caution: In this oven, an incandescent
!
lamp with a power of less than 40 W, a
height of less than 60 mm, a diameter
of less than 30 mm or a halogen lamp
with socket type G9, a power of less
than 60 W is used. The lamps are
suitable for operation at temperatures
above 300 °C. Oven lamps can be
obtained from Authorised Service
Agents or technician with licence.This
product contains a lamp of energy
class G.
Caution: The lamp used in this
!
appliance is not suitable for household
room illumination. The intended
purpose of this lamp is to assist the
user to see food stuffs.
28
1. Turn off power at the main power
supply (your fuse or breaker box)..
2. Turn the glass cover counter clockwise
to remove it.
(See Cleaning the oven.)
3. If your oven lamp is of type (A) shown
in the figure below, remove it by rotating
as shown and replace it. If it is of type
(B), pull and remove it as shown in the
figure and replace it.
4. Install the glass cover.