Advertisement
Available languages
Available languages
Supplied Accessories
BA
Please check and identify the supplied accessories.
BIVAC power silpply cord 'i..0.ctdesis avtencsnliehlsusinanuaians 1
(For United Kingdom: RJA0045-K)
(For Continental Europe: RJA0003-K)
{J Remote control transmitter (RAK-SV012WH) ........eseeeseesssesees 1
[J Batteries TEC R03, AAA, UMGE-4) uu... esccsssesesecesesssesesssesneseesersenes 2
Eo) Rack mount Kitt.2.cc9sscscislsecdisss Geenciesaviiesscaucoduacbexedcssenee ister saeels 1
The rack ears (For United Kingdom: RYQ0059)
(For Continental Europe: RYQ0059)
The rack panels (RYQ0060)
TF Screws (XYN3B+FI1OPZ) oes esecessceseeesscscssseesseceesesesesescsecasseseess 8
ENG
Installation of rack mount kit
1 Assemble the rack ears and panels, and tighten
2 Remove the 4 screws on side enclosure, and attach
with included screws.
the unit to the rack mount.
Ch
Screws (4)
Included
screws (8)
Notes on placement
M@ Place ona
flat, level surface so that the front-rear inclination does not exceed 15°.
@ Avoid places such as the following:
¢ Near any equipment or device that generates strong magnetism.
¢ On any heat-generating equipment or device, or in any place where the temperature is high (40°C or
higher).
Extremely cold places (5°C or below).
Near an AM/FM tuner or TV.
(It may produce noise in the broadcast, or disturb the TV picture.)
For long periods of time in direct sunlight.
In dusty or smoky locations.
In locations prone to vibrations.
In locations where the rear panel is less than 10 cm away from the wall or back of an audio rack.
i
¢ Within reach of children.
@ Do not place heavy objects, other than system components, on top of the unit.
@ When carrying or storing the unit, handle it with care so it is not subjected to any strong bumps.
@ To avoid problems due to vibration.
* Do not place a book or similar object under this unit.
¢ Do not route the connection cables (of this or other units) across the operation panel, across the top, or
under the unit.
E-5
Advertisement
