Advertisement
Available languages
Available languages
Playback Functions provided by the Remote Control Transmitter
Playback of any Desired Segment (Access Play) |
Notes:
Example:
By specifying a segment and pressing the PLAY button, playback will begin from that location.
* This operation cannot be performed with tapes which have no program numbers recorded on them.
It may not be possible to find short segments less than 1 minute long.
Select the desired program number with the program number button on the remote control transmitter. The
program number will appear on the program number display.
Press the PLAY button. While the program number is being searched, the play indicator will flash. After the
specified program number has searched, the play indicator illuminates and play begins.
To begin playback from 10th program
Press "1", "0", and PLAY buttons in that order. The unit searches for the specified program, playback begins
and the program is displayed on the program number display.
To cue the machine to a desired segment:
If a desired audio segment is specified and the PAUSE button is pressed, the specified program number is
searched and the unit enters the pause mode. While the tape is searching for each segment, the pause indicator
will flash. To begin playback, press the PLAY button.
To change a specified program (Only effective in stop mode):
Press the "0" button twice, then press the correct button for the desired selection.
Playback of Segments in any Desired Order (Program Play)
Note:
Example:
This function cannot be used with tapes on which program numbers have not been recorded.
Select the desired segments with the program number buttons on the remote control transmitter in the stop
mode. The segment selected will appear in the program number display panel.
Press the MEMORY button on the remote control transmitter to memorize specified segment.
Repeat steps 1 and 2 to memorize segments in desired order.
Up to 32 steps can be memorized in this way.
Press the PLAY button. Playback begins from the first selection. While the tape is searching for the beginning
of selections, the play indicator flashes. After memorizing, if the PAUSE button is then pressed, the first selection
is searched and the unit enters the pause mode.
To play segments 3, 5 and 8 in that order
Press "3", "MEMORY" "5", "MEMORY"->"8", "MEMORY", and PLAY button.
When the last program has been played, the unit enters the stop mode.
To change program selections:
If it is desired to change some selections and the MEMORY button has not yet been pressed, press the "0" button
twice to cancel the incorrect selections. Then enter the correct selections. When the MEMORY button has already
been pressed, pressing the STOP button cancels all selections and then enter the new selections again.
To confirm memorized program selections:
If for example, segments 3, 5 and 8 have been memorized in that order, and the RECALL button is pressed while
segment 3 is playing, the display will show first memorized program and sequence (PNO 03, P-01), next
memorized program and sequence (PNO 05, P-02), and last memorized program and sequence (PNO 08, P-03)
in that order.
After last memorized program is displayed, display returns to original display.
E15
Advertisement
