Advertisement
BATTERY REPLACEMENT
USE 9V BATTERY
O
Loosen the screw and open the Pedal.
©Take out the battery from the Battery
Housing and pull up the Battery Strap.
© Connect a new battery to the Battery
Strap, then put it in the Battery Hou¬
sing.
©Put the Coil Spring to the Spring
Base and close the Pedal.
* Make sure that the Battery Strap
is not caught in the Pedal or Coil
Spring.
0 Firmly tighten the screw.
PRECAUTONS
• When the OD-2 is not in use for a long
period, remove the battery to prevent
the trouble caused by the battery leak¬
age.
• If the battery voltage drops, effect be¬
comes dull or no sound is produced.
To prevent that, replace the battery, at
the time you might think too early.
• Be sure to keep the battery securely
connected even while using the AC
Adaptor, then the OD-2 will continued
to operate even if the AC Adaptor cord
comes out during performance.
• Unplug the cord from the INPUT jack
when the OD-2 is not in use to avoid
wasting the battery.
AC ADAPTOR(OPTION)
BOSS ACA-120
For 117V AC
BOSS ACA-240
For 240V AC
Please be sure to use
the BOSS AC Adaptor
ACA-120, 220 or 240
depending on the line
voltage in your country.
Using any other adaptor
will cause trouble.
BOSS ACA-220
For 220V AC
Advertisement
