Advertisement
IMPORTANT NOTES
• When operating the OD-2 from the AC line, use the BOSS ACA Series Adaptor.
• Avoid using the OD-2 in extreme heat, humidity or where it may be affected by dust.
CONNECTIONS
Amplifier
To AC Adaptor Jack
-
■■
BOSS
AC Adaptor
(ACA-120,
220 or 240)
The OD-2 is
Electric guitar
turned on by
plugging in.
BOSS OD-2
(
If the OD-2 is not to be used, disconnect the connection cable from the Input Jack.
OPERATION
After making all the necessary connections, set the panel
as shown left.
O
Pfess the Pedal Switch and make sure the Indicator lights up. If it does
^
p
not light up, press the pedal once again.
* This indicator also serves as battery check indicator, if it lights dimmer
or does not light at all, battery replacement is required.
If you want a powerful
overdrive
effect,
turn
the TURBO Switch on.
To reduce the volume
difference between the
direct and overdrive sou¬
nds, adjust the volume
of the overdrive sound
with the LEVEL Knob.
Set the OVER DRIVE
Knob to an appropriate
position.
Rotate the TONE Knob
while playing the guitar
to make the tone color
you prefer.
Advertisement
