Table of Contents
Advertisement
CLEANING
A
NOTE: Welch AJIyn Light Source should not be sterilized or
immersed.
1. Prior to cleaning, turn power off and disconnect the power cord Irom both
the wall outlet and the Welch Allyn Light Source.
2. The external surtaces may be cleaned by wiping with a cloth dampened
with mild soap and water or by using the following cleaning/disinfecting
solutions. DO NOT IMMERSE.
• Cidex. CidexPlus
• 70% isopropyl alcohol
•
10
% mild bleach solution
• Metracide
• 10% Wescodyne
• Banicide
• Wavecide-01
3. The power cord may be wiped clean using the same cleaning'disinfecting
solutions listed above. Wipe dry with a clean cloth. Care must be taken
not to get the plug prongs wet. DO NOT IMMERSE.
4. Do not plug the unit into a wall outlet until it is thoroughly dry.
Advertisement
Table of Contents
