Install The C1004 - Malta Dynamics C7002-G2 Instruction Manual

Installing the C1004
To install the SRD housings onto the FBH, follow the procedure detailed in
Figure 5A:
1. Prepare Dual Connector for Attachment
2. Prepare FBH and Preliminary Attachment
Understanding C1004 Parts
Gate/Lock Bar
Locking Indicator
1. Prepare Dual Connector for Attachment
A B
Locking Indicator
Release Buttons
1. Prepare Dual Connector for attachment:
(A) Push and hold both Release Buttons while
simultaneously pulling out the Gate/Lock Bar. (B)
Take note of the red Locking Indicator which
should no longer be visible once installation is
complete. (C) Attach SRLs to Dual Connector.
Finished Result
MaltaDynamics.com | 800-494-1840
Figure 5A: Attaching Twin-leg SRD to FBH with C1004
C
Release Buttons
2. Prepare FBH and Preliminary Attachment
D E
2. Prepare FBH and Preliminary Attachment:
(D) Lift the Dorsal D-ring to the up-pointing
position. Then loosen the intersection of the two
web straps that pass through the D-ring slot to
create slacked loops of about 2" or 3". (E) Insert
the Gate/Locking Bar of the Carabiner into the two
intersecting slacked loops. (F) Slide the Gate/Lock
Bar back to the fully closed position. Ensure that
the red Locking Indicator is not visible. (G)
Remove the slacked loops from the intersecting
web straps by pulling up through the D-ring slot
and the D-ring holder.
30
F F
G
Manual Revision Code:
MD-20230508