Picture Orientation Setting - Toshiba TLP510 Owner's Manual

PICTURE ORIENTATION SETTING
CAUTION
+ When a ceiling mount is required, please consult with
the dealer. (Always use the specially designed ceiling
fixture "TLPTK3".) For more details, refer to the
instruction manual attached to the ceiling fixture.
Ifyou use the projector mounted on the ceiling, ask the
Sp are MENU
dealer to clean the filter and replace the lamp. ete, for MENU A/¥/<4/> Tees
|
your own safety.
By inverting the picture, various projector installations are possible to meet the room conditions.
Setting the Picture Orientation
Display the image as explained in "PICTURE PROJECTION". (Z-\
Location of the screen and projector Settin,
pret $ Press P.
The selecting bar moves to the list of the
Floor- setting items.
rote i
Dean Viewer STD rN
: [VIDEO
of / mr
Viewing @ picture projected on the front of the 4 wh 2
'screen from a floor. : [PROJECT STD)
'Translucent screen
A = 2 SELECT aa ENTER
Floor- ' 3
mounted a
Viewer
REA
projection (a) Press A/ ¥ to select
" "
Viewing a picture projected through the back| PROJECT 5 and press
of the screen from a floor installation. Vv MENU.
Ceiling- BACK SAVE E X I T RESET|
'mounted front A t
projection a"
geen bau
sure the -
document Viewer Cel C )
imaging camera
is stores securely of ce
thomajedoren | Viewing a picture projected on the Tront of (4) > Press <4 /® to select the
the ceding, the screen from a ceiling installation, ) required orientation, and
Ceiling- q 2
anounied reer
Fianslucent sereen
Lt
press A. (Refer to left chart)
rojection :
Enver Bac
sure the docum. Viewer RC
icra (a) oath a
etored securely (STD SREA%CEI-ZR.C)
whenmo:nting | Viewing a picture projected through the
te La ac "| back of the screen from a ceiling installation,
(2 TSELECT 2 : ENTER.
It automatically disappears after about 10
press < / B® to select
"EXIT" and press MENU.
The menu disappears.
* Ifyou select "SAVE", the setting is
seconds if no button is pressed.
"MODE". i memorized and stored in memory even
The setting items of MODE are listed. | after you turn the power off.
C)
(a) Press A/¥ to select
02)
* Even if you do not have the adjustments saved, they are stored until you turn the power off.
+ Ifyou select "BACK" and press the MENU button, you will return to the previous menu
* If you select "RESET" and press the MENU button, the setting value returns to "STD".
* If you select "SAVE" and press the MENU button, it will not only save the current adjusting item's value. It will save all the adjusting
item's value. :
ma 27