Table of Contents
Advertisement
22.Do not leave documents on the unit for long
periods of time while using the document
imaging function.
Do not leave texts, papers or other documents for
projection on the unit for long periods of time. The
heat could erase the letters on a thermal paper.
23. Before replacing the fluorescent light, turn off the power and wait at
least one hour for the fluorescent light to cool down.
The fluorescent light gets hot, so handle it with care.
Failure to do so may result in burns or other injuries.
24.Do not leave documents in the bottom of the
projector.
Documents can block the air intake holes, making
the inside of the projector heat up and causing
breakdowns.
25.Do not move the projector while the arm is
still erect.
Always store the arm back in position when
moving the projector. Otherwise injury or damage
may result.
26.Camera section is not locked. Do not hold the
camera cover and camera unit when carrying
out, etc.
Danger such as dropping, or cause of failure and
injury may result.
BEFORE
USE
6 =
Advertisement
Table of Contents
