Table of Contents
Advertisement
3.3. Access / Internal Firewall
3.3.1. Firewall
Local Access
When enabled, connections to the IOTA user interface from the subnetwork IOTA is located on are
accepted. When disabled, they are rejected.
Remote Access
When enabled, connections to the IOTA user interface from subnetworks other than the one IOTA is located
on are accepted. When disabled, they are rejected.
3.3.2. 802.1x Security
Activate
Enable or disable 802.1x authentication.
Authentication
Defines the authentication method:
● 'EAP-MD5': The EAP-MD5 (message-digest algorithm v5) method checks against the MD5 hash of
the user password for authentication. The EAP-MD5 is defined in RFC 2284.
● 'EAP-TLS': The EAP-TLS (Transport Layer Security) uses Public key Infrastructure (PKI) to set up
authentication using a RADIUS or other authentication server. This protocol requires client-side
certificates for communicating with the authentication server. The EAP-TLS is defined in RFC 5216.
Identity
Specifies the username for the 802.1x EAP-MD5 or EAP-TLS server.
22
Advertisement
Table of Contents
