Advertisement
U4 Transmitter — 1PCS
U4 Receiver — 1PCS
USB Cable — 1PCS
XLR Male to 1/4" TS Male Adapter — 1PCS
Manual — 1PCS
Bag — 1PCS
U4 person wireless monitoring system provides better sound feedback for stage performers and performance quality. As a portable wireless system, you don't need to set up. Just plug-and-play to quickly build your monitoring system.
Start the power switch, the channel indicator will light up.
U4 provides USB charging cable you can connect to USB Charger Adapter or other USB charging devices
Note: Turn off the power switch while charging. Please do not use U4 when charging, which may reduce battery life.
Connect to the socket
CHARGING TIMES | BATTERY LIFE |
0:15 | 30 min |
0:30 | 1 hours |
1:00 | 2 hours |
2:30 | 5 hours |
U4 has six channels.
Use the channel switch button to switch the channel. Set the Receiver channel same with Transmitter. The blue Led signal on the receiver will always be on when the connection is successful.
If you want to add more receiver, just set the receivers to the same channel as the transmitter.
LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE.
Adjusting Gain and Listening Volume For the best audio quality, start by adjusting the levels from the mixer or audio source and maximizes the signal-to-noise ratio.
Line (+4 dBu) | Use with mixers or other professional audio devices that send line-level signals. |
Aux (-10 dBV) | Use when connecting consumer audio devices such as portable audio players or computers. |
Note: The channel faders on most mixers do not affect the volume of the Aux sends.
When performers have different monitoring needs, they can set up multiple transmitters. If the receiver is set to the channel corresponding to the transmitter, the audio can be received. Or create mute rehearsal system.
U4 operates within the 2.4GHz ISM band which is utilized by Wi-Fi, Bluetooth, and other wireless devices. 2.4GHz is an open band and, as such, does not require a license to be used worldwide.
CHANNEL 1 | 2402MHz, 2480MHz, 2482MHz |
CHANNEL 2 | 2408MHz, 2472MHz, 2474MHz |
CHANNEL 3 | 2416MHz, 2464MHz, 2466MHz |
CHANNEL 4 | 2434MHz, 2440MHz, 2442MHz |
CHANNEL 5 | 2427MHz, 2448MHz, 2450MHz |
CHANNEL 6 | 2422MHz, 2456MHz, 2458MHz |
* U2 1~4 channels are the same as U3/U3C/U4 1~4 channels, U2, U3/U3C and U4 use in same time max is 6 sets.
ISSUE | SOLUTION |
No Sound |
|
Distorted Audio |
|
Low audio output at the receiver |
|
Signal instability: RF LED flickering |
|
Unable to switch the channel |
|
Multiple connect |
|
U4 WIRELESS IN-EAR MONITOR SYSTEM | ||
Tuning Bandwidth | 2400 – 2483.5MHz | |
Working Range | Up to 90ft Actual Range Depends On Rf Signal Absorption, Reflection And Interference. | |
Audio Frequency Response | 20Hz – 20KHz(-3dB). | |
Dynamic Range & Signal-To-Noise Ratio | 107dB | |
Battery Life | 5 Hours of battery life | |
RF Sensitivity | -88dBm | |
Total Harmonic distortion | 0.2% | |
RF Output Power | 10 mW E.I.R.P. max | |
Operating Temperature Range | -18℃ to 57℃. Battery Characteristics May Limit This Range. | |
Channel Count | Up To 6 Channels | |
Latency | Less than 5ms Latency | |
High Resolution audio | 24-bit/48Kbps | |
U4 TRANSMITTER | U4 RECEIVER | |
Dimensions | 30 X 28 X 100 mm | 47 X 41 X 60 mm |
Weight | 90g | 118g |
Housing | Molded plastic and cast metal | Molded plastic and cast metal |
Battery | 3.7V Rechargeable Li-ion, 860mAh | 3.7V Rechargeable Li-ion, 1200mAh |
Impedance | Input 47kΩ(1KHz) | 6-600Ω |
Audio input Connector | Balanced XLR Male input | |
Audio output Connector | 3.5mm stereo output | |
Mode | Aux mode: -10dBV | Max. +12.2dBu Line mode: +4dBu | Max. +22dBu | |
Battery life | Up to 5 Hours | Up to 5 Hours |
Antennal Impedance | 50Ω | 50Ω |
ANTENNA Type | 1/4 Wave Sleeve Dipole, Non-removable | 1/4 Wave Sleeve Dipole, Non-removable |
Number Of Antenna | 1 | 2 |
PLEASE READ THESE INSTRUCTIONS IN A SAFE PLACE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK: DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE.
BEFORE USING YOUR XVIVE U4 MICROPHONE WIRELESS SYSTEM, CAREFULLY READ THE OPERATING INSTRUCTIONS.
LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE.
Over exposure to excessive sound levels can damage your ears resulting in permanent noise-induced hearing loss. Do not use earphones for a long time and set the volume below 70% or lower.
2nd floor, Building 12, Xicheng Industrial Area, Xixiang Town, Baoan District, Shenzhen Guangdong China. 518101
E-mail: nancy@xviveaudio.com
www.xvive.com
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Xvive U4 In-Ear Monitor - Wireless Complete System Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the U4 that isn't answered in the manual? Leave your question here.