General Power Tool Safety Warnings - Bort BPS-850-QL Manual

GB ENGLISH
JIG SAW
Intended Use
The machine is intended for making separating cuts and
cutouts in wood, plastic, metal, ceramic plates and rubber
while resting firmly on the workpiece . It is suitable for
straight and curved cuts with mitre angles to 45° . The saw
blade recommendations are to be observed .
TECHNICAL SPECIFICATIONS (FIG. 1)
Voltage / Frequency
Power
Amplitude of the stroke
No-load speed
Max cutting depth in: wood
Max cutting depth in: metal
Slope of the cut
Speed regulation
Pendulum mode
Shuttle Service (stage)
Working light
Laser guide
Weight
PRODUCT ELEMENTS (FIG. 2)
1 . Switch for on / off;
2 . Button for switch locking;
3 . Wheel for adjusting sawing speed;
4 . Lever for selecting sawing mode .
THE COMPLETE SET INCLUDES
1 . Blade for wood;
2 . Hex-nut wrench;
3 . Extra set of carbon brushes;
4 . Parallel guide;
5 . Vacuum cleaner adapter .
Product Life:
The service life of the product is 5 years .
Production date:
Is indicated on the packaging of the goods .
Shelf life:
Shelf life is not limited (subject to storage conditions) .
Storage conditions:
Products are stored in dry, ventilated warehouses at tem-
peratures from 0 ° C to +40 ° C with a relative humidity of
not more than 80% .
Transportation:
It is strongly prohibited dropping and any mechanical im-
pact on the packaging during transportation .
When unloading / loading, it is not allowed to use any
type of equipment that works on the principle of packing
clamping .

GENERAL POWER TOOL SAFETY WARNINGS

Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury .
220 V / 50 Hz
Save all warnings and instructions for future reference .
620 W
The term "power tool" in the warnings refers to your main-
soperated (corded) power tool or battery-operated (cord-
23 mm
less) power tool .
0 – 3 000 rpm
65 mm Work area safety
• Keep work area clean and well lit . Cluttered or dark areas
8 mm
45°
• Do not operate power tools in explosive atmospheres,
+
+
3
• Keep children and bystanders away while operating a
+
+
Electrical safety
2 kg
• Power tool plugs must match the outlet . Never modify
• Avoid body contact with earthed or grounded surfac-
• Do not expose power tools to rain or wet conditions .
• Do not abuse the cord . Never use the cord for carrying,
• When operating a power tool outdoors, use an extension
• If operating a power tool in a damp location is unavoid-
Personal safety
• Stay alert, watch what you are doing and use common
9
Read all safety warnings and all in-
structions.
invite accidents .
such as in the presence of flammable liquids, gases or
dust . Power tools create sparks which may ignite the
dust or fumes .
power tool . Distractions can cause you to lose control .
the plug in any way . Do not use any adapter plugs with
earthed (grounded) power tools . Unmodified plugs and
matching outlets will reduce risk of electric shock .
es, such as pipes, radiators, ranges and refrigerators .
There is an increased risk of electric shock if your body is
earthed or grounded .
Water entering a power tool will increase the risk of
electric shock .
pulling or unplugging the power tool . Keep cord away
from heat, oil, sharp edges and moving parts . Damaged
or entangled cords increase the risk of electric shock .
cord suitable for outdoor use . Use of a cord suitable for
outdoor use reduces the risk of electric shock .
able, use a residual current device (RCD) protected sup-
ply . Use of an RCD reduces the risk of electric shock .
sense when operating a power tool . Do not use a power