HikRobot SC3000X Series Quick Start Manual page 8

SC3000X Series Vision Sensor Quick Start Guide
● Before powering on the device, please confirm that the device is installed in good
condition, the wiring is firm, and the power supply meets the requirements.
● This device is not suitable for use in places where children may appear.
● Using the wrong type of battery replacement (for example, some types of lithium batteries)
may cause the safety protection to fail.
● Do not throw the battery into a fire or heating furnace, do not squeeze, bend or cut the
battery, which may cause an explosion.
● Do not place the battery in an extremely high temperature or low pressure environment,
which may cause the battery to explode or leak flammable liquids or gases.
● Waste batteries can cause pollution to the environment, please follow the instructions to
dispose of the used batteries.
● If the device emits smoke, odor or noise, please turn off the power and unplug the power
cord immediately, and contact the dealer or service center in time.
● It is strictly forbidden to touch any terminal of the device when operating it. Otherwise
there is a danger of electric shock.
● It is strictly forbidden for non-professional technicians to detect signals during device
operation, otherwise it may cause personal injury or device damage.
● It is strictly forbidden to maintain the device is powered on, otherwise there is a danger of
electric shock.
● Avoid aiming the lens at strong light such as lighting, sunlight, or laser beams, etc.,
otherwise the image sensor will be damaged.
● It is forbidden to touch the image sensor directly. If necessary, please moisten a soft clean
cloth with 75% or less alcohol and gently wipe off the dust. When the device is not in use,
please add a dust cover to protect the image sensor.
● Keep clean of the device's image acquisition window. It is recommended to use cleaning
water to wipe off the dust.
● If the device does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the device yourself. We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.
● Caution: If the device has battery, risk of explosion if battery is replaced by an incorrect
type. Dispose of used batteries according to the instructions.
● Please dispose of the device in strict accordance with the relevant national or regional
regulations and standards to avoid environmental pollution and property damage.
Note
● Check whether the device's package is in good condition, whether there is damage,
intrusion, moisture, deformation, etc. before unpacking.
● Check the surface of the device and accessories for damage, rust, bumps, etc. when
unpacking.
● Check whether the quantity and information of the device and accessories are complete
after unpacking.
● Store and transport the device according to the storage and transport conditions of the
device, and the storage temperature and humidity should meet the requirements.
● It is strictly prohibited to transport the device in combination with items that may affect
or damage the device.
2