Login - HikRobot SC3000X Series Quick Start Manual

SC3000X Series Vision Sensor Quick Start Guide

6.4 Login

Note
● Make sure that your device IP address is in the same network segment with the PC where
you installed the client software before connecting the device to it.
● The default login password is Abc1234, and it is highly recommended to change the
password for the first time use.
● Follow the guidance to find the password if you forget it.
● Refer to the user manual of the SCMVS client software for detailed operation.
Steps
1. Click the device in the device list.
2. Enter password.
3. Click to log in.
4. (Optional) Check Remember me to remember the password if necessary.
Note
If you forget password, click Forgot Password in the login interface to view the device's
serial No., and mail it to the technical support personnel or call them to get the
corresponding resetting file. After that, import the resetting file and reset the password as
the default one.
Figure 6-5 Login Window
17