Table of Contents
Advertisement
BankSwapMode
This setting controls the Bank Swap Mode. The options are Auto, Disabled and Swap CPU.
Power Down Enable
Use this setting to enable or disable DDR power down mode. The options are Disabled,
Enabled and Auto.
DRAM Scrub Time
This setting provides a value that is the number of hours to scrub memory. The options
are Disabled, 1 hour, 4 hours, 6 hours, 8 hours, 12 hours, 16 hours, 24 hours, 48 hours,
and Auto.
TSME
Transparent SME. The options are Disabled, Enabled, and Auto.
Enhanced PPR
Enable a full memory test. The testing will increase the boot time. The options are Disabled
and Enabled.
CPU1 Memory Information
CPU1 Memory Information
These sections are for informational purposes. They will display some details about the
detected memory according to each CPU on the motherboard, such as:
•
Detected Size (per slot, in MB)
•
Current Speed (MT/s)
CPU2 Memory Information
CPU2 Memory Information
These sections are for informational purposes. They will display some details about the
detected memory according to each CPU on the motherboard, such as:
•
Detected Size (per slot, in MB)
•
Current Speed (MT/s)
58
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
