Table of Contents
Advertisement
Overview of Flash Function
CAMERA FUNCTION
| ТҮРЕА
After the flash is charged, the camera automatically
switches to the flash-sync speed.
Automatic aperture setting in the Picture Mode,
Programmed AE Mode or Shutter-Priority AE mode.
Flash confirmation signal in the viewfinder
TTL auto flash.
Slow-speed sync in the Shutter-Priority AE Mode or
Manual Exposure Mode
AF spotbeam
Trailing-shutter-curtain flash sync (+ 4)
Contrast-control flash mode ( * 4)
TYPE A : Built-in flash
TYPE В: AFSOOFTZ( * 6), АЕЗЗОЕТ2
TYPE С: АЕ4ООЕТ2, AF240FT
TYPE О: AF400T, AF280T, AF200T, AFO80C,
AF140C, AF200S,
TYPE E : AF200S, AF160, AF140,
Notes:
* 1. When using a Type D flash (except AF200S,) in
the MS (manual sync) or M (manual) modes, or
when using a Type E flash : set the camera's expo-
sure mode to the Aperture-Priority AE, Manual or
Bulb Mode. The Program, and Shutter-Priority AE
modes cannot be used because the actual required
aperture value may change.
* 2. Only the AF200S, flash does not operate.
* 3. Only the manual mode can be used.
* 4. The shutter speed is 1/60 or slower.
* 5. Trailing-shutter curtain sync combined with
TYPE B or TYPE C flash.
* 6. Multi-burst and slave-synch flash are possible.
Using other type of a flash
Use of non-Pentax flash units may damage the camera.
For the best results, use the Pentax dedicated flash unit.
03
SNO
Q39
|!
Advertisement
Table of Contents
