ASAHI PENTAX Z-70 Operating Manual page 66

змошунзао азомулам M
(4) ABOUT EXPOSURE COMPENSATION
Purpose
The exposure compensation allows to deliberately over-
exposure (brighten) or underexposure (darken) a sub-
ject.
How to Set
1. When the hyper button [@ ] is depressed, the com-
pensation value and the bar graph will be displayed
on the LCD panel.
2. While depressing the hyper button, turn the select
dial to set the desired compensation value.
@
* The exposure compensation does not work in the
Green Operation Mode, Manual Exposure Mode and
Bulb Exposure Mode.
* The exposure compensation range is in the range from
ЗЕМ to +3EV in 0.БЕМ step.
* When the exposure compensation is in use, the bar
graph and dot are displayed on the LCD panel. (61 is
displayed in the viewfinder.
* Moving one dot on the bar graph indicates 0.5EV step.
How to Cancel
To cancel the exposure compensation, reset the com-
pensation value to 0.0 by depressing the Tv," Ау button
while holding down the hyper button.
* The exposure compensation will not be canceled even
if the main switch is set to [ OFF ].