ASAHI PENTAX Z-70 Operating Manual page 76

змоцмнзао Q39NVAQV ill
(8) USING A PENTAX DEDICATED EXTERNAL FLASH
If the built-in flash is not powerful enough, a Pentax
dedicated external flash should be used.
Using the TTL Auto Flash
1. Remove the hot shoe cover Е, and attach a Pentax
dedicated flash unit.
2. Turn ON the flash.
3. Set the flash to the TTL Auto Mode.
4. Ensure that the flash is fully charged.
5. Focus on the subject and take a flash photograph.
* When the flash is fully charged, the ready lamp on the
flash unit lights up. When the shutter release button is
depressed halfway down, [ $ ) appears in he view-
finder indicating the flash is ready to discharge.
* Using the dedicated flash in each exposure mode is
the samme manner as use of the built-in flash, see
page 67 to 71.
Multi-burst flash with the Pentax dedicated flash
When discharging more than 2 Pentax dedicated
flashes, make sure that they are the same type of the
flashes (refer to the overview of Flash Function on
page 73.), combine the Type B with Type C or Type D
with Type E. The built-in flash can be operated with any
type of Pentax TTL dedicated flash unit.