Autofocusing - ASAHI PENTAX Z-70 Operating Manual

Table of Contents

Advertisement

(ONILOOHS)
NOlLVH34O
овув
ll
(6) AUTOFOCUSING
Set the focus mode switch to [AF
1. Center the autofocus frame [С
ject. When
the shutter release button is depressed
halfway down, the lens automatically focuses.
2. When
the subject is in focus,
the focus
indicator
[О] lights up with the audible PCV signal.
3 over the main sub-
* When the shutter release button is depressed halfway
down, the shutter speed and aperture setting are dis-
played in the viewfinder and the LCD panel.
* When
[$] blinks in the viewfinder and the LCD panel,
the use of the built-in flash is recommended. For more
details on the built-in flash, see page 35.
* The audible PCV signal can be turned off. See details
on page 66.
* During an autofocus operation, the focusing ring
should not be obstructed with your fingers, hands, or
any other objects.
The focus indicator [O] blinks when the camera is not
able to obtain proper focus for one of the following rea-
sons.
D The subject is too close. Adjust the camera-to-
subject distance.
@ The subject is difficult to autofocus. See "HARD-TO-
AUTOFOCUS" on page 45.

Advertisement

Table of Contents
loading

Table of Contents