ASAHI PENTAX Z-70 Operating Manual page 23

(6) FILM LOADING
We suggest that first you operate the camera with no
film loaded to become familiar with its operation.
Automatic film speed setting
This camera їз designed to use DX-coded films with ISO
rating from 25 to 5000.
* When the DX-coded film is used, the correct film.
speed is automatically set for the camera.
* If you use a non-DX coded film, the camera automati-
cally sets the film speed to ISO 100.
* Before loading a film for the first time after purchase,
open the back cover and remove the protective card.
DO NOT TOUCH THE SHUTTER CURTAINS.
Sa
1. To open the back cover, slide the back cover release
lever in the direction of the arrow.
2. Hold the film cartridge with the protruding end down.
Slide the top end in the film chamber first and then
push its protruding end in.
* Always load or unload a film in the shade or by using
your body to shade the camera
(9
(NOIL VHVd3 NOLL овуя |