Table of Contents
Advertisement
rene
e
When the lens aperture ring is at a position other than
"A" (auto).
(Set the main Switch to
[ON] or
(РІСТ).)
How to Set
1. Turn the lens aperture ring to a position other than
[A].
2. While holding down the mode set button, turn the se-
lect dial until [ M ] appears on the LCD panel.
3. Adjust the aperture with the lens aperture ring and
the shutter speed with the select dial.
* The shutter speed and bar graph will be displayed on
the LCD panel.
* When the shutter release button is depressed halfway
down, the shutter speed and the Баг araph will be dis-
played in the viewfinder.
* When the shutter release button is depressed halfway
down with an F or FA lens in use, an approximate ap-
erture indication and shutter speed will appear in the
viewfinder and the LCD panel. With other lenses, no
indication will appear.
* Adjust the exposure in a similar manner as when the
lens aperture is set at "A'(Auto).
Depressing the
hyper button 181 will immediately adjust the shutter
speed for a correct exposure (Hyper Manual).
* When a lens without information contacts is used, the
center weighted metering mode is set instead of the
multi-metering mode.
* When using a Pentax A f/1.2 lens with the lens aper-
ture ring set other than the A position, the center
weighted metering mode will be set instead of the
multi-metering mode. As the exposure will come out 1
to 1.5 stops over, set the lens aperture ring to [A], or
adjust the exposure deliberately 1 to 1.5 stops under.
* The exposure warning is as explained on page 58.
змо
азо
||!
Advertisement
Table of Contents
