ASAHI PENTAX Z-70 Operating Manual page 59

4. Select the aperture setting by the select dial.
* The bar will be displayed underneath the aperture set-
ting in the viewfinder.
* When the shutter release button is halfway de-
pressed, the shutter speed and aperture setting will be
displayed in the viewfinder and on the LCD panel.
* Exposure Warning
If the subject is too bright or dark, the selected shutter
speed will blink in the viewfinder and on the LCD panel
as a warning as shown. When the subject is too bright,
choose a smaller aperture; when it is too dark, choose а
large aperture. When the shutter speed indication stops
blinking, you can take a picture. If both shutter and ap-
erture blink,it means that the exposure is out of meter-
ing range, unable to obtain a correct exposure even if
the aperture is adjusted. Use an ND (neutral density)
filter if the subject is too bright or a flash if it is too dark.
65
змоц G39N IW