ASAHI PENTAX Z-70 Operating Manual page 55

* Exposure Warning
If the subject is too bright or dark, the shutter speed and
aperture setting will blink in the viewfinder and the LCD
panel. Use an ND (neutral density) filter if the subject is
too bright. Use a flash if the subject is too dark.
Program-Shift when the Programmed-AE Mode is in
use
Purpose
The Program-Shift means that the shutter speed "aper-
ture combination is changed while maintaining the
same exposure value to increase or decrease the shut-
ter speed ` aperture effects. For further information on
the Program-Shift, see page 79 and 80.
How to Shift
Turning the select dial to the right changes the shutter
speed to a fast speed (opening the aperture), turning
the select dial to the left changes the shutter speed to
a slower speed (closing the aperture)
* When the program is shiffted, | ^ ] appears on the
LCD panel and the bars appear underneath the shutter
speed and the aperture value in the viewfinder.
* You can shift the program only within the proper ex-
posure range.
How to Cancel
The Program-Shift can be canceled by depressing the
Ту АМ) button.
6)
змоц азом | |