Table of Contents
Advertisement
Functions & Descriptions
UDX-DUAL Receiver (Front)
1. Power Switch: Power system ON or OFF.
2. IR Sensor: When syncing a transmitter to any channel on the receiver, hold the transmitter IR sensor up to this IR
sensor so that they are facing each other. The frequency will be synced and the transmitter will be paired with the
selected channel.
3. Channel IR Button: Press and hold for 3 seconds to initiate pairing mode. The IR Sensor will flash red to indicate
that it is ready to pair.
4. Channel Setup Knob/Button: When the channel is locked, turn to adjust the volume output for that channel.
When the channel is unlocked, press the button to switch between Channel mode and Scan mode, and turn the
knob to change the selected frequency.
PROFESSIONAL DUAL UHF DIGITAL PLL MICROPHONE SYSTEM
POWER
ANT-B
1
UDX-DUAL
BALANCE OUT
CH-2
CH-1
DC INPUT
MIX OUT
MIX OUT
2
3
I R
S E T U P
CHANNEL 1-2
4
CAUTION!
RISK OF ELECTRONIC
UDX-DUAL
SHOCK! DO NOT OPEN!
RF
1
AF
926.00
GR/CH
MHz
SCAN
X:902.00MHz 3MHz/div
Y:REF-50dBm 20dB/div
44%
HI
I R
S E T U P
4
ANT-A
/ 9
Advertisement
Table of Contents
