NAMES OF PARTS AND THEIR FUNCTIONS 1. RECEIVER ON/OFF SWITCH Turns the receiver on or off 2. CH 1 Volume Control This controls the output volume for the Mic on CH 1 NOTE: The VHF-33 is designed to use with various audio equipment, always keep the output level low at first (Between 1/4 to 1/2 of the dial) to avoid feed back from your system.
Page 5
CONNECTIONS BACK FIG. 1 VHF-33 BACK FIG. 2 VHF-33 MIC OUT MIXED MIC IN MIC IN KJ-8000 MIC OUT CDG-300 1 IN...
NAMES OF PARTS AND THEIR FUNCTIONS 14. Low Battery power indicator light Once the power switch is on, the battery indicator light will turn on for about 1/2 of a second to show that the battery is good, if the light never comes on or stays on, this shows the battery is low or dead, please exchange for a new battery 15.