Advertisement

GSM/i10K GSM INTERCOM
NEW INSTRUCTIONS
Installation Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GSM/i10K and is the answer not in the manual?

Questions and answers

Summary of Contents for Bpt GSM/i10K

  • Page 1 GSM/i10K GSM INTERCOM NEW INSTRUCTIONS Installation Manual...
  • Page 2 GSM INTERCOM GSM INTERCOM 4 Button Keypad 5 21 8 1112 14 5 21 8 1112 5 join at audio module side (recommended) Dial No. 4 Dial No. 3 Dial No. 2 Dial No. 1 up to 20m up to 20m screened G 12 6 21 5...
  • Page 3 GSM INTERCOM GSM/i10K Two gate stations 5 21 8 1112 14 5 21 8 1112 14 NB!!! up to 20m G 12 6 21 5 To add two gate stations configure each keypad as A or B. This is done by holding (about 2seconds)
  • Page 4 GSM INTERCOM GSM/i10K Access control The gatestation with access control module is now equipped with the ability to trigger the relays on the GSM master board by entering in a password on the keypad. This is useful in the case where entry and exit maybe be provided to home owners and guests, in addition to the missed call feature of the intercom.
  • Page 5 CONNECTING A HANDSET GSM/i10K Connection unit 330e may be purchased from supplier 100uF 12 VDC (13.8) G 12 6 21 5 MicroSIM Slide and open hinge Antenna connector Page 4 M000042...
  • Page 6 PROGRAMMING GSM/i10K Booting sequence On power up all LEDs will be on. As the unit passes the various tests the LEDs will turn off. Only when the green and blue LEDs are flashing slowly is the unit in the normal running state. “System ready” audio notification will be played through the gatestation.

Table of Contents