Pioneer VSX-D902S Operating Instructions Manual page 37

USING MULTI-ROOM AND SOURCE (MR & S)
[Setting MULTI-ROOM & SOURCE Sub Function]
1. Select LD with the INPUT SELECTOR buttons.
2. Turn the MULTI-ROOM & SOURCE OFF/ON button ON.
* The button lights.
* When MULTI-ROOM & SOURCE is ON, the Sub function at that
time is the same as that set with the INPUT SELECTOR.
After switching MULTI-ROOM & SOURCE ON, the SUB
FUNCTION cannot be switched on the receiver. Switch it from
Sub room with the remote control unit.
rc
iil a
[Setting MULTI-ROOM & SOURCE Main Functions]
3. Select VCR 1 with the INPUT SELECTOR buttons.
L
POR |
4. Start playback of VCR 1 and the LD player.
5. For Main room, adjust volume level with the receiver's MASTER
VOLUME control.
For Sub room, point the remote control at the MR-100 and adjust
the volume level with the MASTER VOLUME buttons.
In Sub room, when you do not know the present volume level or
Sub Function of the receiver, press the RETURN button.
The Sub Function becomes TUNER, and you will hear the
broadcast preset in station call No.1. The volume level will be that
initially set on the receiver. You can then select your desired Sub
Function, and adjust volume to the desired level.
* Switch setting and output
Precautions concerning MULTI-ROOM & SOURCE
* in Sub room, if you use the remote control to switch RECEIVER
POWER off (standby), power to the receiver itself is cut, so be careful
when recording or copying tapes in Main room.
* Remember that if you operate the tuner section in Sub room and
change the station when you are recording a radio broadcast in Main
room, the station you changed to will be recorded.
¢ The first time you use MULTFROOM & SOURCE, volume in Sub room
will be set to the initial level. Each time you switch MULTI-ROOM &
SOURCE ON, volume returns to the initial Jevel.
* When MULTI-ROOM & SQURCE is ON, Sub Function and Sub room
volume level cannot be changed in Main room.
* MULTI-ROOM & SOURCE can only be switched ON/OFF with the
switch on the receiver itself. Set the Sub Function in Main room,
switch MULTI-ROOM & SOURCE ON, and move to Sub room,
Volume leveis in Main room and Sub room.are independent.
* In Main room and Sub room, when a remote control signal is
transmitted at the same time, the receiver does not operate.
eSub room volume cannot be completely cut off. Even if you
continue pressing the MASTER VOLUME-button on the remote
control, there will still be a little sound.
* As the remote control for the Sub room, use the CU-AV70,
CU-AV 100, or CU-AV200. In this case, first have that remote control
memorize the RETURN button command from the receiver's remote
control before use.
SWITCHES AUDIO OUTPUT JACKS SPEAKERS OUTPUT VIDEO i
MULTE ROOM | SURROUND REC REAR AMP REC FRONT MULTI ROOM REAR TO MONITOR MULTI ROOM &
& SOURCE MODE | SELECTOR] PRE OUT A,B SPEAKER { TV SOURCE VIDEO OUT
OFF OFF OFF Mute Main Function | Main Function - Mute | Main Function Mute
OFF OFF ON Mute REC SELECTOR Main Function oa Mute | Main Function Mute
Function
ON OFF OFF | Sub Function | Main Function | Main Function | Sub Function Mute | Main Function Sub Function
OFF ON OFF SUR Rear Main Function SUR Front ~ SUR Rear | Main Function Mute
oa |
OFF ON ON SUR Rear arora SUR Front = SUR Rear | Main Function Mute
* VIDEO {REC) OUT is the same source as AUDIO (REC} OUT. When the input selector is switched to the audio source, VIDEO OUT is mute.
SUR: Surround
37
<ARB1420>