Keysight M8100 Series Getting Started Manual page 18

1 Introduction
Connector
Ref Clk In
Ref Clk Out
Ref Clk Out 16G
18
Description
This input allows locking the clock frequency to an external 10 or 100 MHz reference
clock.
The reference clock output is used to provide a 10 MHz or 100 MHz reference clock to
the DUT or other test equipment.
The reference clock output is used to provide an 8 GHz ... 16 GHz reference clock to the
DUT or other test equipment. It can be used as a precision time-based reference signal
for DCA sampling oscilloscopes.
M8100 Series Arbitrary Waveform Generators Getting Started Guide