2. Gently hold the CD/DVD by the edges with its labeled facing up, and
insert it into the optical disc drive slot straight on slowly.
Gently push the CD/DVD until it is loaded automatically. Do not push it
forcibly or at an angle to the optical disc drive slot. This may cause
damage or adhesion of foreign matter on the surface of the CD/DVD.
These imperfections may prevent the drive from reading from or writing to
it.
Removing discs
To remove the CD/DVD's, follow the steps as detailed below:
1. Check that your computer is on.
If not, power your computer on.
2. Press the Eject button. The CD/DVD will be ejected about halfway.
Do not place your hand or another object near the optical disc drive slot.
User's Manual
Inserting a CD/DVD
Optical disc drive slot
Eject button
Pressing the eject button
Operating Basics
4-3