■
To load CD/DVD's, follow the steps as listed below and refer to following
figures.
1. When the computer's power is on, insert CD/DVD into the ODD directly.
Removing discs
■
Do not press the eject button while the computer is accessing the media in
the drive, instead wait for the indicator to go out before you open the disc
tray. In addition, if the CD/DVD/BD media is spinning when you open the
tray, wait for it to fully stop before you remove it.
To remove a CD/DVD/BD, follow the steps as listed below.
1. When the computer's power is on, press the eject button to open the
After the disc tray has opened slightly, you should wait for a moment to
ensure the CD/DVD/BD media has stopped spinning before you fully open
the tray.
Downloaded from LpManual.com Manuals
User's Manual
Slot ODD
Tray ODD
disc tray slightly and then gently pull it out of the system until it is fully
opened.
Operating Basics
4-16