HW Setup
This chapter explains how to use the TOSHIBA HW Setup program to
configure your computer, and provides information on the other settings.
Accessing HW Setup
To run the HW Setup program, click start followed by Control Panel
followed by Printers and Other Hardware and then click TOSHIBA
HWSetup.
HW Setup window
The HW Setup window contains a number of tabs (General, Display, Boot
Priority, Keyboard, CPU, LAN, Device Config and USB) to allow specific
functions of the computer to be configured.
In addition there are also three buttons: OK, Cancel and Apply.
OK
Cancel
Apply
User's Manual
Chapter 7
Accepts your changes and closes the HW Setup
window.
Closes the window without accepting your
changes.
Accepts all your changes without closing the HW
Setup window.
7-1