Table of Contents
Advertisement
Please take note of the following when you use i.LINK devices:
■
You may need to install drivers for your i.LINK devices to function.
■
Not all i.LINK devices have been tested, therefore compatibility with all
i.LINK devices cannot be guaranteed.
■
Some devices might not functions such as Standby Mode or automatic
power off.
■
Do not connect or disconnect an i.LINK device while it is using an
application or when the computer is automatically shutting it down to
save power - doing so might cause data to be destroyed.
Disconnecting
To remove an i.LINK device, follow the steps as detailed below:
1. Open the Safely Remove Hardware icon on the Windows Task Bar.
2. Point to i.LINK (IEEE1394) device and click the left Touch Pad control
button.
3. Disconnect the cable from the computer and then from the i.LINK
device.
Please be aware that you should also refer to the documentation that was
supplied with your i.LINK device.
Bluetooth USB Adaptor
A Bluetooth adaptor that has a USB connector. Wireless communications
can be carried out with Bluetooth-compatible equipment by connecting to
the USB port of the computer.
You can buy the module from TOSHIBA dealer.
Bluetooth Wireless Mouse
The Bluetooth Wireless Mouse is a wireless optical mouse compatible with
Bluetooth.
You can buy the Bluetooth Wireless Mouse from TOSHIBA dealer.
Bluetooth Wireless Stereo
The Bluetooth Wireless Stereo is a wireless stereo headphone compatible
with Bluetooth.
You can buy the Bluetooth Wireless Stereo from TOSHIBA dealer.
User's Manual
Optional Devices
9-29
Advertisement
Table of Contents
