Optional Devices
Inserting an SD card
To insert an SD card, follow the steps below.
1. Insert an SD card in the Bridge media slot.
2. Press gently to ensure a firm connection.
Make sure the SD card is oriented properly before you insert it.
Do not turn the computer off or switch to Standby Mode or Hibernate
Mode while files are being copied - doing so may cause data to be lost.
Removing an SD card
To remove an SD card, follow the steps below.
1. Open the Safely Remove Hardware icon on the Task Bar.
2. Point to SD card and click.
3. Push in the card and release it to pop the card out slightly.
4. Grasp the card and remove it.
9-6
Bridge media slot
Inserting an SD card
Bridge media slot
Removing an SD card
Bridge media indicator
SD card
Bridge media indicator
SD card
User's Manual