Toshiba Qosmio G20-102 User Manual page 127

HDD
CD-ROM
FDD
CD-ROM
HDD
LAN
FDD
LAN
CD-ROM
HDD
CD-ROM
FDD
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
*1
Only on models with two hard disk drives installed.
*2
In this computer, CD-ROM refers to the optical media drive.
To change the boot device, follow the steps below.
1. Hold down F12 and boot the computer.
2. The following menu will be displayed with the following icons:
Built-in HDD1, Built-in HDD2, CD-ROM, FDD, Network (LAN), boot.
A bar will appear only under the selected device.
User's Manual
The computer looks for bootable files in the
FDD
following order: HDD, floppy disk drive, CD-ROM
LAN
and LAN. (Default)
The computer looks for bootable files in the
HDD
following order: floppy disk drive, HDD, CD-ROM
LAN
and LAN.
The computer looks for bootable files in the
CD-ROM
following order: HDD, CD-ROM, LAN and floppy
FDD
disk drive.
The computer looks for bootable files in the
CD-ROM
following order: floppy disk drive, CD-ROM, LAN
HDD
and HDD.
The computer looks for bootable files in the
LAN
following order: CD-ROM, LAN, HDD, floppy disk
FDD
drive.
The computer looks for bootable files in the
LAN
following order: CD-ROM, LAN, floppy disk drive
HDD
and HDD.
U Selects the USB floppy disk drive.
N Selects the network.
1 Selects the primary HDD1.
2
Selects the primary HDD2
C
Selects the CD-ROM
*1
.
*2
.
HW Setup
7-3